Home > Products > Cold Roll Forming Machine > C Purlin Roll Forming Machine

Product Categories

C Channel Roll Forming Line

C channel roll forming line C channel roll forming line of e quipment structure: De-coiler—Leveler—Punching device—Roll forming—cutting to length—collection table C channel roll forming line of t echnique data: 1、coil thickness:1.5-2.5mm 2、Line...
Product Details:

 C channel roll forming line


C channel roll forming line of equipment structure:
De-coiler—Leveler—Punching device—Roll forming—cutting to length—collection table 


C channel roll forming line of technique data:
1、coil thickness:1.5-2.5mm
2、Line speed:6-8m/min(adjustable)
3、Operation area:L35mxW3m


C channel roll forming line of service


No.nameModeQuant.Motor powerremark
1 
De-coiler
MT-2001set  
2levelerHS-200 
1set
3 
3Servo feeder 1set1.8 
Hydraulic or press punching 1set optional
Punching mould 1set  
4forming lineWall type or gantry type1set22Optional
5forming roller 1set  
6cutting deviceYQ400X3Z1set5.5 
7run out tableSL-400X40001set  
8Electric control system 1set  

 
C channel roll forming line of forming craft


 

图片47.jpg




图片51.jpg


C channel roll forming line of Suzhou Tianyuan


图片17.jpg



After-sell service:

图片37.JPG 

FAQ:
Q:What is the feedback control principle of hot and cold tandem mills?
A:The closed loop feedback control of hot strip mill is mainly based on the measured results of the strip shape measuring instrument at the finishing rolling mill. The bending force of the last or several racks is adjusted to ensure the flatness of the strip. Closed loop feedback control of tandem cold rolling mill usually takes shape at the end of the frame, measuring the shape of the roll, and forming a closed loop feedback with the last frame. Some mills are also equipped with flatness measuring rolls and closed loop feedback systems in the first frame.

Related Products
Feedback: