Home > News > Content

Product Categories

Pipe Welding Machine Safe Operating Procedures
Sep 30, 2017

Pipe Welding Machine Safe operating procedures

If there is such a defect, it will have a great impact on the equipment, metal oxide melting in the V-shaped mouth, if found in the edge of the steel pipe pipe has a smaller than the melting speed, melting speed is relatively fast, The vertex of the mouth, and then formed a dense metal sector containing molten metal sector, these molten gold

And metal oxides, usually after normal use, the case of extrusion can not be properly discharged, and the formation of a mixed band. The weld of the pipe is cracked after crushing, and if the weld is found at the location of the weld fracture. Inclusions and weld fibrous fissures are compared, the fracture is very flat, no metallic luster. Such defects may also be given to chain-like "oxides" and are not very defective.

Under the general couple, burr or rust will fall, the formation of the bridge before the vertex, it will cause a short circuit of the pipe machine to cause the current beating phenomenon. Welded pipe units can be so widely used with its own advantages are inseparable. Weld pipe unit industry development so quickly, in order to be invincible, you need to improve the quality of the production of welded pipe unit, do a good job of pipe commissioning and routine maintenance work. Then the daily maintenance and commissioning of the pipe unit to pay attention to what?

In general, the development of welded pipe units must comply with the safe operating procedures, the operator in the operation of the unit must not be in contact with the mold, but also pay attention to the handle on the direction of the outlet, to avoid improper operation of their own health and safety impact The In addition, the operator of the welded pipe unit should pay attention to checking whether the lubricating points of the unit are lubricated in place. Otherwise, pay attention to the addition of some lubricating oil to ensure the normal operation and operation of the unit. Weld pipe unit use process should pay attention to the use of some high temperature synthetic aluminum composite grease, so as to avoid damage to the welded pipe unit.

Also pay attention to adjust the pipe saw in the flying saw check valve, pay attention to flying saws and steel pipe production speed to keep pace, so you can effectively avoid the blade is damaged. Relative to the welding unit investment, to master the information of market changes is particularly important, but look at today's welded pipe unit market, many welded pipe unit investment information limitations, there is no relevant channels to provide information to dealers, especially with the current The sale of the industry information about the information, because the daily business to run their own, read the newspaper to see the time is less, through the Internet to get the information even less.